⊹implicit.ink
read this in

properties /integral valve

qualifier number + unit a measured amount

valve opening pressure

The differential pressure at which a valve opens, as a numeral with a pressure unit. A qualifier of `integral_valve` and not a flat property beside it: a part may carry two or three valves, and a loose pressure could not say which one it belongs to. WIX publishes a `Bypass Valve Opening Pressure` of 0.551 bar for the 51521; Bosch publishes `Pressure limiting valve: 8.5 bar rel.` for the FP 300 and `8,0 to 10,0 bar` for the FP 200-7; and the whole radiator-cap trade publishes nothing else at all - febi's field name is literally `Opening Pressure` (`1 bar` on the 04496, `1.4 bar` on the 01211), Gates prints `Pressure: 1.1 bar` AND `Pressure: 16 psi` as two rows for the RC133, Stant heads it `Pressure Rating (PSI)` and Motorad `Pressure Rating`. FOUR HOUSES, FOUR FIELD NAMES, ONE QUANTITY, ONE CODE - which is the code/label law doing exactly the work it exists for [L10]. Habib's own row 36, `Radiator Cap (Kichuchu) 0.9`, is a statement of this qualifier and is the only specification his entire sheet carries for this vertical. TWO LIMITS RECORDED RATHER THAN HIDDEN (b158): Motorad publishes THREE pressure figures for one cap - `SAE Pressure Range (PSI): 14-18`, `Pressure Rating: 16.0 PSI` and `Maximum Pressure: 18 PSI` on the ST16 - and only the setting itself has a home here, the range and the ceiling being the standing bounds obligation; and Bosch publishes a limiting valve's setting as a RANGE (`8,0 to 10,0 bar`) for the same reason.

Valve opening pressure is a measured figure, given in bar.

It is a qualifier of integral valve — it has meaning only inside a integral valve statement, one per statement, never on its own. It belongs with integral valve to measurement — its measurable, physical facts.

It is answered inside every integral valve statement, not as a standalone question on a kind.

answered with
№number + unit — a number paired with a unit drawn from an exhaustive unit vocabulary.
value domain
Pressure units — the vocabulary its answers are drawn from.
qualifier of
integral valve — one per statement — it has meaning only inside that host's statement.

Answered inside every integral valve statement — not a standalone slot on any kind.