fitting position
also called axle · axle position · where on the vehicle it goes
WHERE ON THE VEHICLE THE PART IS BUILT TO GO - which axle, which side, and which of two levels at a corner. GENERALISED AND RENAMED AT b158, WHICH DISCHARGES ITS OWN BINDING OBLIGATION H4-f1, and the discharge went further than the obligation asked. b156 minted this as `axle position`, front or rear, and put it ON NOTICE to lift the moment a second axle-side kind was seeded. Three were seeded at b158 - a bearing, a linkage joint - and the evidence showed two things at once. FIRST, THE PROPERTY WAS NAMED TOO NARROWLY. The trade's field is `Fitting Position`, and it is stated MANY TIMES OVER RATHER THAN COMPOUNDED: Lemforder's ball joint 31007 01 publishes THREE separate rows - `Front Axle Right`, `Front Axle Left`, `Lower`; febi's 07977 publishes the same three; febi's 21356 publishes `Rear axle left (passenger side)` and `Rear axle right (driver's side)`. An axle, a side and a level are three answers to one question the trade asks once, so the vocabulary grows by `left`, `right`, `upper` and `lower` and the label becomes what the houses call it. Without the side values a handed part and its mirror are one statement in this grammar - and the trade prints a `paired article number` field precisely because they are two articles (febi 18134/18135, TRW JTS7519/JTS7518). Note what was NOT added: a `both sides` value, because cardinality-many over {left, right} states it WITHOUT LOSS, which is exactly how Lemforder prints it - `Front Axle, Lower, Left and right` on the 31007 01 is three of this vocabulary's values and no fourth. The vocabulary also carries `inner` and `outer` from the same field on the same house's sheet (Lemforder 26671 01, `Fitting Position: Front Axle, both sides, inner`), which is what separates an inner tie rod from an outer tie rod end [A-14]. SECOND, IT DOES NOT LIFT, AND THE REASON IS THE CAMPAIGN'S OWN BOUNDING RULING. H4-f1 asked for a lift to a common parent under [L5]. There is no such parent and there may not be one: the only class that could parent a brake pad, a wheel bearing and a ball joint is an `AutomotivePart` branch, which the operator's 2026-08-25 ruling forbids outright and which UNSPSC refuses too - it files brake friction at 25.17.17, bearings at 31.17.15 and ball joints at 25.17.42, three families in two segments. So the property is RE-DECLARED on `Bearing` and `LinkageJoint` under [L5], which that law expressly permits on unrelated classes and which the pool has now done for `max_temperature`, `physical_form`, `thread_size`, `service_temperature_min`/`_max`, `dynamic_viscosity` and `meets_specification` before it. `BrakeFrictionPart` therefore keeps ALL SEVEN of its exclusive slots and its [L3] re-test PASSES UNCHANGED - nothing was taken away from it. The shape of H1-f6, H2-f7, H3-f5 and H5-f8, resolved for the first time by re-declaration rather than by lift, and the reason is recorded here so it is not re-litigated at H7. IT IS STILL NOT A FITMENT [REFINE-LOG 2026-08-25], and the widened vocabulary does not weaken that: `front axle`, `left` and `lower` name POSITION CLASSES and no vehicle, no model, no engine and no year, exactly as `filtration_duty` names a fluid and `installation_type` names a wall. The line is `Braking system: Sumitomo` on a brake pad, which names the CALIPER'S MAKER and is a cross-reference to another product [H4-f9]. PUBLISHED ON EVERY KIND IN THIS BATCH EXCEPT ONE, and the exception is recorded: NSK's own wheel-bearing catalogue heads a column `POSITION` with `Front Wheel` and `Rear Wheel`; febi publishes `Fitting Position: front axle left, front axle right` on the wheel bearing kits 24414, 18769, 24571 and 172633; KAMOKA's 5500095 publishes `Fitting Position: Rear Axle` AND NOTHING ELSE, the only field on the page. No radiator cap and no pump publishes it, and neither class declares it. CARDINALITY MANY, and NSK proves it from a second direction: the SAME NSK part number appears in its table with `Front Wheel` on one vehicle and `Rear Wheel` on another. Filed under identity, so NOT axis-eligible - a left part and a right part are two listings, never a toggle in one buy box. [b156's original wording, kept because it is the reasoning that admitted the property at all:] Published as its own field by every house in the brake trade - Brembo's label guide names it the `mounting axle flag` and glosses it as `indicates on which axle (front or rear) the brake pads are to be fitted`, and Textar puts the word in the product title itself.
Fitting position is answered with one word chosen from the fitting positions list — the same word shared across every product that uses it.
It belongs to identity — who and what it is.
asked by the kinds that answer it
3 kinds answer it, each for any number of values. The same question can be reused by unrelated kinds — one meaning, many homes.
asked by kinds that answer it
The same question can be reused by unrelated kinds — one meaning, many homes.
| kind | how many |
|---|---|
| brake friction part | many |
| bearing | many |
| linkage joint | many |